STEELE RESTORATION
  • Blog

Charlotte Roofing Company

Storm damage roof repair guide in Charlotte: What to do next

5/23/2022

0 Comments

 
Picture
​Storm damage roof repair helps return your property to its former glory
Storm damage roof repair experts in Charlotte NC have solved many damage cases with the unpredictable weather hitting the region over the last few years. A huge storm can damage your roof even with adequate preparation, so you need to be ready to take care of it once it happens.

Here are some key things to do after a storm destroys your roof.

Key rules to remember
Before thinking of the roof, you have to stay safe while dealing with the storm's aftermath. Here are some fundamental rules to remember.
  • Your safety is of the utmost importance – practicing caution after a storm is necessary since the injury risk is high. Do not inspect damage by climbing on the roof unless you are sure it is safe.
  • Wait for the storm to pass – Do not worry about your roof while the storm still rages. Any attempt to salvage roof parts during the storm can risk your safety or your family's.
  • Maintain a level head – avoiding panicking in the face of adversity is an important point, but most people find it hard to follow the rule. Breathe in, and don’t stress over the work or resources. Keeping a level head allows you to make brilliant choices that help deal with the damage.

Investigate the damage
Depending on the type of storm you just experienced, there are different types of damage that your property can experience. Here are some of the different damage types.

Rain damage
This is one of the most common causes of roof damage after a storm. After a storm, you can expect extensive water damage from the rainwater seeping into the house. Some of the problems you need to be wary of are mold growth, rotting, and extensive roof leaks.

Hail damage
Although less common compared to rain and wind, hail also causes damage to the roof structure. Some apparent signs are holes and dents that can sometimes result in leaks.

Wind damage
Wind can also wreak havoc on your roof during a storm. The main issue with wind damage will be loose or missing shingles and roofing tiles. You need the shingles replaced immediately to avoid roof leaks.

Find the best storm damage roof repair service in Charlotte NC
Roof repair after a storm can be quite technical, so you should not handle it yourself. Hire the best storm damage repair experts in Charlotte for exceptional services.
​
Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas, including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

0 Comments

Siding installation experts in Charlotte explain vinyl siding’s fastening procedure

5/22/2022

0 Comments

 
Siding installation
Siding installation involves proper fastening of the panels to a wall
Siding installation experts in Charlotte NC know how to install vinyl siding in the right way. One of the processes they handle is the siding’s fastening to the wall. The choice of the right fastening material and process will make sure the end product is appealing.
Here is a complete outline of the vinyl siding fastening procedure.

Get the right materials for the fastening procedure
You can go for various fastening materials, including:
  • Nails – heads should be at least 7.9mm in diameter and 38.1 mm in length. If your siding has a backer board, your nails should be longer, at least 63.5mm.
  • Screw fasteners – screws should be at least a size eight and corrosion-resistant.
  • Staples should not be less than 25.4mm in length. Go for a 16-gauge option that is semi-flattened.

You should choose corrosion-resistant fastening material, preferably galvanized steel, aluminum, or stainless steel.

Cutting vinyl siding accurately
Most sharp objects can cut vinyl sidings, but we recommend tin snips, circular saws, scoring tools, or utility knives for a safer and cleaner cut.

When cutting:
  • Have your safety goggles on while following all proper construction practices.
  • For tin snips, avoid closing the blades fully at the end of each stroke.
  • If you are using a circular saw, install the blade backward and cut slowly. Vinyl material is often delicate, and cutting in the reversed direction works well.
  • Utility knives and scoring tools can snap the siding in half with medium pressure.

Vinyl siding fastening procedure
  1. Regardless of your fastener choice, you should make sure they penetrate at least ¾ into the furring or framing stud.
  2. Make sure the panels are well locked along the bottom length. Do not pull or force the panels upward when nailing.
  3. Leave some allowance, preferably 0.8mm, between the siding and the head of the fastener. The clearance makes sure the siding does not buckle when it experiences some temperature change.
  4. Fasten in the center of the panel first and work your way towards the ends.
  5. Your fasteners should be well placed in the center of each siding to allow for expansion and contraction.
  6. You should drive the fasteners straight to avoid panel buckling or distortion.

Work with the best siding installation experts in Charlotte NC
Fastening vinyl siding can be complex for a DIY job. It would be best to trust the experts with the siding installation job for the best results.

Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.


0 Comments

Best roofing contractor in Greenville SC give tips on roof maintenance

5/19/2022

0 Comments

 
Roofing contractor
Best roofing contractor knows what material will suit your Greenville SC home. They can assist you with any issues you may have about your roof, which is one of the most crucial components of your home. In many ways, it may be compared to the skin on your body; it is the first layer of defense against the outside world. It will shield your family from the elements, including rain, sun, and storms. Roof neglect can result in expensive difficulties, which may even need the replacement of your entire roof if the problem is not addressed. At the absolute least, any carelessness will result in a high energy bill and the need for regular damage management. In light of these considerations, it is important to get your roof evaluated on a regular basis. The sooner an issue is identified and addressed, the easier it will be to rectify the situation.

Roof coating
Roof systems that have been properly maintained, are moisture-free, and are evaluated on a regular basis are good candidates for roof coatings. However, if your roof is 15 years or older, a new coating may not be necessary to avoid moisture-related problems such as cracking, peeling, or leaks. It is critical to remember that coatings are a temporary solution for maintenance, not a long-term one. This is a less expensive alternative that will only add a few years to the life of your metal roofing system. It is not a good alternative if your roof is prone to ponding or is in desperate need of replacement. Additionally, you may wish to reconsider a roof coating if your facility is located in an area with a high concentration of steam, dust, debris, and dirt.

Metal roofs
Metal roofs have various advantages over traditional roofing materials like cedar and asphalt, such as a longer life cycle. A metal roof can survive strong rain, hail, and high winds. They have also been attributed to preventing residential fires. In many regions, homeowners may save up to 30% on their insurance by adding a metal roof. Metal roofs come in three styles: panel, standing seam, and lookalikes like cedar, tiles, or slate. Large ribs on a standing-seam metal roof must be crimped or soldered together. Panel roofing is similar to standing seam roofing but requires screws. 

Find top roofing contractor in Greenville SC and Charlotte NC
​
If you’ve got a roof, you need us! We’re here to sort out all your roofing problems so you don’t have to suffer through another restless night. While you’re busy with your everyday life, we’re here to sort out the behind-the-scenes to make sure you don’t have too much on your plate. We’re just a call away! Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

0 Comments

Residential roofing experts in Charlotte NC explain the types of roof vents

5/18/2022

0 Comments

 
Residential roofing
Residential roofing install roof vents in your home for a balanced attic
Residential roofing experts in Charlotte NC make sure your home’s ventilation is working in the best possible way. Various factors affect air circulation at home, and experts install roof vents to provide quality air. Using the vents prevents mold and mildew problems in the home, which can sometimes affect the home’s comfort.

Ventilation options for your roof and attic can be confusing to choose among. To make a proper selection, you should check through the options and make sure they are suitable. This article discusses the various roof vent options that residential roofers install for a balanced attic.

Intake vents
These vent types often take air into the home from the outdoors. Therefore, intake vents allow for adequate air circulation by replacing the amount of air that leaves through the exhaust vents.

By making sure the attic has a balanced airflow, these vent types improve comfort and keep your cooling energy costs low.

Intake vents are categorized into two, namely:
  1. Soffit vents are the most common of the two types. These vent types are placed underneath the roof eaves along the house’s length. Roofers place the soffit vents in spaces where the insulation does not cover for maximum functionality.
  2. Roof intake vents – As the name suggests, these vent types are roof-mounted. Unlike the soffit vents, they are placed on the roof in a manner that blends in to allow for adequate air inflow.

Roof or wind turbines
Wind turbines are also a common roof vent option for drawing out hot and moist air. They have vanes built into them, which the wind on the outside turns, creating a vacuum that sucks out the hot air. This allows dry and cooler air to flow into the attic, maintaining a favorable temperature.

Exhaust vents
These roof vent types allow most of the air in the attic to flow into the outdoors. The residential roofers place exhaust vents at the topmost point of the roof. Hot air rises and gathers in such areas meaning the exhaust vents let such hot air out.

Work with the best residential roofing experts in Charlotte NC
Roof vent installation can be quite tasking; you have to leave the work to experts since they can easily handle it. Working with Charlotte's top-ranked residential roofing expert will get you top results.
​
Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

0 Comments

    Author

    The best roofers in Charlotte, NC.

    Archives

    March 2023
    February 2023
    January 2023
    December 2022
    November 2022
    October 2022
    September 2022
    August 2022
    May 2022
    April 2022
    February 2022
    January 2022
    November 2021
    October 2021
    September 2021
    August 2021
    July 2021
    June 2021
    May 2021
    April 2021
    March 2021
    February 2021
    January 2021
    December 2020
    November 2020
    October 2020
    September 2020

    Categories

    All
    Affordable Roofing
    Best Quality Roofing
    Best Roofing Company
    Best Roofing Contractor
    Best Roofing Services
    Best Storm Damage Roof Repair
    Charlotte NC
    Commercial Roofer
    Commercial Roofing
    Concord NC
    Greenville SC
    Gutter Installation
    Gutters
    Insurance Restoration
    Property Insurance Claim
    Property Insurance Claims
    Property Insurance Claims And Adjustors
    Quality Roofing
    Residential Roofing
    Residential Roofing Company
    Residential Roofing Contractors
    Residential Roofing Services
    Residential Roof Repair
    Roof Contractor
    Roofer
    Roofer Contractor
    Roofer Contractors
    Roofers
    Roofing Company
    Roofing Contractor
    Roofing Contractors
    Roof Leak Repair
    Roof Repair
    Roof Repair Contractors
    Siding Installation
    Storm Damage Repair
    Storm Damage Restoration
    Storm Damage Restoration Company
    Storm Damage Roof Repair
    Top Affordable Roofing
    Top Roofer Contractor
    Top Roofing Contractor
    Top Roof Repair

    RSS Feed

Powered by Create your own unique website with customizable templates.
  • Blog